|
 |
|
FEEDING AND CONVEYING
|
|
|
DRYING AND DEHUMIDIFYING
|
|
|
DOSING AND MIXING
|
|
|
HEATING AND COOLING
|
|
|
GRANULATOR AND RECYCLING
|
|
|
|
 |
Temperature Controllers
FO Series Oil Temperature Controller
The FO series of temperature control use heat transfer oil as heating medium and processes under indirect cooling method for heating up to 180oC.
Features
• All pumps are manufactured from corrosion-free phosphor bronze by 'Speck' in Germany.
• Standard control accuracy 0.5oC. Special design upon request.
• Moduler design is compact, economical, efficient and basically maintenance free.
• Automatic water drain when change the mould.
• Complete with safety protection and error indication system.
• Hot water piping is single unit design extended to 4 inlet and 4 outlet separation tubes to avoid leakage.
• Rapid heating and cool off speeds, temperature is kept stable at all time.
• Electrical circuit built to comply with CE safety requirements. |
Specifications
Model |
FO-1805(D) |
FO-1810(D) |
FO-1820(D) |
Power supply |
|
AC220~480,50 / 60HZ,3Phase |
Temperature range |
v |
50~180 |
Media |
oC |
Thermal oil |
Heater |
kW |
6 (6x2) |
9 (9x2) |
9 (9x2) |
Cooling |
|
Indirect cooling |
Cooling capacity |
kcal/Hr |
7200 |
9000 |
9000 |
Temperature control |
°C |
PID (±0.5) |
Pump |
kW |
0.5 (0.5x2) |
0.75 (0.75x2) |
1.5 (1.5x2) |
Max. pressure 50/60HZ |
kg/cm2 |
3.4/4 |
5.2/6 |
4.2/5 |
Max. volume 50/60HZ |
L/min |
30/40 |
60/70 |
67/80 |
Power requirement |
kW |
6.5(13)20 |
10(20) |
10.5(21) |
Min. water pipe |
kg/cm2 |
2 |
Cooling water pipe |
inch |
1/2" PT |
Media pipe-inlet/outlet |
inch/set |
3/8" PT-4(8) |
Dimensions L/W/H |
mm |
630x300x620
(630x600x620) |
700x300x770
(700x600x770) |
Weight |
kg |
50(100) |
55(110) |
60(120) |
Flow Diagram

|