|
 |
|
FEEDING AND CONVEYING
|
|
|
DRYING AND DEHUMIDIFYING
|
|
|
DOSING AND MIXING
|
|
|
HEATING AND COOLING
|
|
|
GRANULATOR AND RECYCLING
|
|
|
|
 |
Temperature Controllers
FCV Series Water/Oil Temperature Controller
The FCV series is designed to operate in pressure or suction mode, to allow continuous production despite leakage from mould or connections. The temperature operation range with water up to maximum 90oC , or oil up to maximum 150oC.
Features
• All pumps are submersible pumps manufactured from corrosion-free phosphor bronze by "SPECK" in Germany .
• Self-optimizing microprocessor controller with digital display of set and actual temperature.
• Leak stop device prevents the medium from leaking.
• Automatic mould drainage.
• Level control provides auto dry run protection.
• Electrical and mechanical safety thermostat.
• Automation water refill (except oil operation)
• Electrical circuit built to comply with CE safety requirements. |
Specifications
Model |
FCV-05(D) |
FCV10(D) |
Power supply |
v |
AC220~480, 50 / 60HZ,3Phase |
Temperature range |
oC |
50~Water 90oC or Thermal oil 150oC |
Media |
|
Clean water, Thermal oil |
Heater |
kW |
6 (6x2) |
Capacity of tank |
L |
15 (15x2) |
Cooling |
|
Indirect cooling |
Cooling capacity |
kcal/Hr |
5400 (5400x2) |
Temperature control |
oC |
PID (±0.5) |
Pump |
kW |
0.5 (0.5x2) |
1 (1x2) |
Max. pressure 50/60HZ |
kg/cm2 |
3.3/4 |
5.2/6 |
Max. volume 50/60HZ |
L/min |
30/40 |
60/70 |
Power requirement |
kW |
6.5 (13) |
7 (14) |
Min. water pipe |
kg/cm2 |
2 |
Cooling water pipe |
inch |
1/2" PT |
Media pipe-inlet/outlet |
inch/set |
3/8" PT-4(8) |
Dimensions L/W/H |
mm |
550x300x600 (550x600x600) |
Weight |
kg |
45 (90) |
Flow Diagram

|