|
 |
|
FEEDING AND CONVEYING
|
|
|
DRYING AND DEHUMIDIFYING
|
|
|
DOSING AND MIXING
|
|
|
HEATING AND COOLING
|
|
|
GRANULATOR AND RECYCLING
|
|
|
|
Metering and Mixing Stations
Series FSD Screw Doser

The FSD Screw Dosers have been developed to use with extruders and injection molding machines. They are equipped with a stepping motor having an incremental accuracy of 1/100 of a revolution. The microprocessor control includes a digital readout and setting for the metering screw. The molding machine sends a signal to the Screw Doser on the start of screw recovery. The Screw Doser then accurately meters the color or additive directly into the feed throat during this time. The number of revolutions and the revolutions per minute are set to match the screw recovery time. The screw speed range can be set from 1~999 RPM.
The FSD Screw Doser consists of three main parts: transition neckpiece, screw metering housing with stainless steel material hopper, and control. The top and bottom flanges of the transition piece are not drilled, allowing you to match the bolt hole pattern to the feed throat of the molding or extrusion machines. The unit should be installed at 90 degree angle to the direction of the heat cylinder to prevent damage from heat emissions. |
Features |
• Constructed of stainless steel, ensuring a long production life.
• Microprocessor control includes a digital readout and setting for the metering screw.
• Easy to change screw and sleeve.
• The roof-shaped quick-change (the dosing section can be removed without granulate leaking form the neckpiece), large opening on the side of the neckpiece, large window and improved static blending.
• Electrical circuit built to comply with CE safety requirement. |
Options |
• Custom screw and sleeves can be manufactured upon request.
• Special polished treatment for optical parts upon request.
• Level sensor in dosing hopper. |
Technical Features
Control |
Microprocessor with digital display |
Input signal |
Potential free contacts / 24 VDC contacts / Tacho input voltage |
Motor |
Accurate stepping motor (brush less) |
Injection molding |
Jog mode and continue mode |
Extrusion |
Jog and synchronic mode |
Hopper |
Stainless steel 6 liter |
Volt / frequency |
110/220 Volt 50-60Hz |
Specifications
FSD 40 |
Screw / Sleeves |
5/6 |
6/13 |
9/16 |
12/19 |
15/22 |
18/25 |
21/28 |
g/hr |
0~175 |
0~1500 |
0~6000 |
0~13200 |
0~23400 |
0~33000 |
0~40000 |
|