DOSING AND MIXING
50B/150B/500B SERIES VOLUMETRIC BLENDERS
150/500 SERIES VOLUMETRIC BLENDERS
GRAVIMETRIC BLENDERS
SCREW DOSER
CONTINUOUS LOSS-IN-WEIGHT
GRAVIMETRIC BLENDER
METER THE MASTERBATCH, ADDITIVES CONTROL THE COSTS
HEATING AND COOLING
WATER /OIL TEMPERATURE CONTROLLER
OIL TEMPERATURE CONTROLLER
WATER TEMPERATURE CONTROLLER
TEMPERATURE CONTROLLER WITH PRESSURE MODE
HI-TEMPERATURE OIL TEMPERATURE CONTROL
Water cooled Chiller
Air cooled Chiller
GRANULATOR AND RECYCLING
GRANULATOR FGL SERIES
GRANULATOR FGM SERIES
GRANULATOR FG SERIES
CPV Range Two Component Proportioning Valves

Single Hopper Loader
SP Series Hopper Loader For Free-Flowing Powders



Features • The unit is designed for dust-free operation with using a Teflon filter bag. Filter efficiency is 1µ.
• Modules are designed for easy filter replacement ensuring optimal cleaning. No tools needed for material changes or clean out.
• This unit interior is easily accessible when the quick-action locks on the unit cover are released and the filter insert is removed.
• The control panel can be either mounted on the hopper loader as standard or installed on the vacuum unit.
• A self-closing flap mechanism with magnetic switch is fitted to the material discharge port underneath the hopper.
• The numerous surface treatments are possible to meet the customer request.
• There is a cleaning door with a filter cartridge fitted with hopper body in order to assist operation and maintenance of the flap mechanism.
• Modules are quickly assembled using a hand clamping operation.
• Compressed air purge in vacuum fillter to eliminate impurities and boost conveyance.
Application For all free-flowing bulk material, both powders and pellets.


Specifications

Model

SP25

SP50

SP100

Hopper capcity

Liter

25

50

100

Filter surface

m2

0.42

0.54

0.66

Compressed air

kg/cm2

2~3

Probe diameter

inch

2

2.5

3

Width

mm

Ø360

Ø420

Ø500

Overall height

mm

1100

1567

Ø1826

Weight, apporx.

kg

35

45

60

 

Single Hopper Loader
SN Series Hopper Loader For Non-Flowing Powders

Features • High density phase vacuum conveyor for fine powders. Uses "sinter-plate" filters. Separation efficiency=99.999% and clean gas side particulate content ≤ 1mg/m3 S.T.P.
• Impact resistant, anti-corrosive, anti-static, water-proof and long working life.
• Fast assembly and disassembly for cleaning. Quick and easy module replacement.
• Special design, lower air-purge consumption, and best air-purge cleaning efficiency. Installation and removal of the filter is possible on both sides by simply removing one screw.
Sinter-Plate

Compressed air purge in vacuum fillter to eliminate impurities and boost conveyance. Modules are quickly assembled using a hand clamping operation.
Applications Titanium Dioxide, Pigment, Toner, Calicum Carbonate, Caron Black, Silica Sand, Cement, Phenolic Moding Compound, Epoxy Resin, Phenolic Resin, Zeolite, Glass Fiber Resin, Soda Ash Clay, Flyash, Limestone, Starch, Talc, Flour, Melamine Resin, etc.

Specifications

Model

SN25

SN50

SN100

Hopper capcity

Liter

25

50

100

Filter surface

m2

1.1

2.2

3.3

Compressed air

kg/cm2

2~3

Probe diameter

inch

2

2.5

3

Width

mm

Ø350

Ø420

Ø500

Overall height

mm

1370

1567

1826

Weight, approx.

kg

40

65

80



TOP
 
| COMPANY PROFILE | PRODUCTS | SALES NETWORK | E-CATALOG | TRADE SHOW | CONTACT US | FAQ | DESIGN INFORMATION |