DOSING AND MIXING
50B/150B/500B SERIES VOLUMETRIC BLENDERS
150/500 SERIES VOLUMETRIC BLENDERS
GRAVIMETRIC BLENDERS
SCREW DOSER
CONTINUOUS LOSS-IN-WEIGHT
GRAVIMETRIC BLENDER
METER THE MASTERBATCH, ADDITIVES CONTROL THE COSTS
HEATING AND COOLING
WATER /OIL TEMPERATURE CONTROLLER
OIL TEMPERATURE CONTROLLER
WATER TEMPERATURE CONTROLLER
TEMPERATURE CONTROLLER WITH PRESSURE MODE
HI-TEMPERATURE OIL TEMPERATURE CONTROL
Water cooled Chiller
Air cooled Chiller
GRANULATOR AND RECYCLING
GRANULATOR FGL SERIES
GRANULATOR FGM SERIES
GRANULATOR FG SERIES
CPV Range Two Component Proportioning Valves


Single Hopper Loader
E(EV) Series Single-phase Single Hopper Loaders


Easy Access / Quick Cleanup FASI E-Series corrosion free, stainless stell single hopper loader is designed to provide rapid transportation of free-flowing, virgin granules and regrind directly to your injection molding machine. The hinged vacuum head ensures quick cleanup time and easy maintenance. The integral single-phase suction motor creates a flow of air which carries the plastic granules into the hopper through the material line for a pre-selected time. The granules are then discharged directly into the processing machine hopper. This cycle is repeated until both the machine hopper and hopper loader are full.
Reliable Performance All units have a microprocessor control for setting and displaying loading time, loading function, and mode slection, digitally. Fault diagnosis is provided as a standard feature of the control. All models are built to the highest standards from quality stainless steel providing consistent, reliable performance.
Design Features • Full stainless steel construction
• Fabric suction filter (with s/s mesh).
• Low noise suction head.
• Mechanical flap (or Electric level sensor).
• Easy clean blow-back cartridge filter (E series).
• Electronics prepared for centralized system.
• Electrical circuit built to comply with CE safety requirements.
Options • Self cleaning filter ( Models denoted by 'FC' ).
• Two-component proportioning valve.
 
EV series

This series is fitted with a plexi-glass material chamber with electric level sensor, also a non-return flap valve on the material discharge port of the hopper bowl.
 

Specifications

Model

E3

E6

E12

Bowl capacity

litre

3

6

12

Motor Power

W

1100

Throughput

kg/hr

70

140

200

Probe diameter (d1)

inch

1.5

Mounting diameter (d2)

mm

214

265

265

Depth (D)

mm

334

347

347

Overall height (H)

mm

500

620

755

Weight, approx.

kg

12

13

15

   

Model

EV3

EV6

Bowl capacity

litre

3

6

Motor Power

W

1100

Throughput

kg/hr

70

140

Probe diameter (d1)

inch

1.5

Mounting diameter (d2)

mm

60x60

60x60

Depth (D)

mm

312

347

Overall height (H)

mm

615

735

Weight, approx.

kg

13

14

  [ * ]: Under the conveying distance of 3 metres.
Specifications, appearances and dimensions are subject to change without prior notice.


TOP
 
| COMPANY PROFILE | PRODUCTS | SALES NETWORK | E-CATALOG | TRADE SHOW | CONTACT US | FAQ | DESIGN INFORMATION |