DOSING AND MIXING
50B/150B/500B SERIES VOLUMETRIC BLENDERS
150/500 SERIES VOLUMETRIC BLENDERS
GRAVIMETRIC BLENDERS
SCREW DOSER
CONTINUOUS LOSS-IN-WEIGHT
GRAVIMETRIC BLENDER
METER THE MASTERBATCH, ADDITIVES CONTROL THE COSTS
HEATING AND COOLING
WATER /OIL TEMPERATURE CONTROLLER
OIL TEMPERATURE CONTROLLER
WATER TEMPERATURE CONTROLLER
TEMPERATURE CONTROLLER WITH PRESSURE MODE
HI-TEMPERATURE OIL TEMPERATURE CONTROL
Water cooled Chiller
Air cooled Chiller
GRANULATOR AND RECYCLING
GRANULATOR FGL SERIES
GRANULATOR FGM SERIES
GRANULATOR FG SERIES
CPV Range Two Component Proportioning Valves

Metering and Mixing Stations
Continuous Loss-In-Weight Gravimetric Blender

FlowSave fulfills the extrusion sector's demands for accurate and homogenous dosing and constant blending. It provides extremely precise loss-in-weight blending and feeding of various size and bulk density materials such as pellets, regrind and powder.
FlowSave covers a wide production range of up to 1500 kg/h, and can feed up to 5 materials. Separate load cells for each component allow constant monitoring for each component flow. If there are any changes in properties, e.g. bulk density, pellet size, etc., the FlowSave automatically adjusts individual feeders to match the extruder rate at the exact required ratio, without affecting the accuracy of the blended material. This ensures a constant blending ratio according to the recipe at all times.


  Advantages and features • Compact design and low space requirement.
• Optimal homogeneous mixing of the dosed materials.
• Easy and quick cleaning when changing recipe.
• Gram/meter monitoring or Extruder control Kg/hr control Kg/hr for options.
• Changeable dosing screws for different throughput ranges (from 0.02 up to 250 kg/h) for each material.
• Multiple recipes.
• Designed for extrusion rates up to 1,500 kg/hr.
• Flexible configuration permits the installation of up to 5 dosing stations.
  Gram/meter Monitoring Using a shaft encoder, the FlowSave can monitor the throughput in terms of gram/meter. By continuously measuring the material flow (kg/h) by means of a loss-in-weight method, and by monitoring the product speed (m/sec), the FlowSave translates the throughput to terms of gram/meter. Gram/meter monitoring allows easy monitoring for the operator.
  Extruder Control
(kg/hr)
The FlowSave's controller can supply a continuous control signal to the extruder's controller, which controls the extruder rpm to ensure the required pre-set throughput.
The FlowSave changes the extruder's speed to meet the desired throughput, and simultaneously adjusts the screw speed of each component to ensure constant ratio of the material at all times.
  Precision The material flow is monitored continuously, and the controller automatically regulates the rotation speed of the dosing screws. This ensures a precise homogenous blend of materials.
Its high resolution weighing system allows precise low-rate additive feeding.
  Savings You can achieve maximum savings with the FlowSave. The final product shows a considerably lower fluctuation range, minimizing the usage of costly materials and reducing waste and start-up scrap. You can lower the additive percentage during operation, which also represents a significant saving.
  FASI-View A monitoring program for the FlowSave range of feeders. You can utilize FASI-View to:
• See in one single screen the working statuses of all the FlowSave feeders.
• View historic graphs of each feeder.
• See all the parameters of each feeder, such as percentage of each material, etc.
• Update the working parameters directly to the feeders.
• Generate historic reports, such as total weight, actual percentage, etc.
 
  ※ Specifications, appearances and dimensions are subject to change without prior notice.


TOP
 
| COMPANY PROFILE | PRODUCTS | SALES NETWORK | E-CATALOG | TRADE SHOW | CONTACT US | FAQ | DESIGN INFORMATION |